Dry Fit workshop

Learn Dry Fit by building

Lessons 1 to 11 build a built-in desk and wall unit step by step, then check the plan, follow the assembly steps, make a table from the project library, keep your offcuts, label your parts and start from a parts list. From Lesson 12 on, each lesson builds one project start to finish and ends with its shop plan PDF.

The finished built-in desk: two base cabinets with a 60 inch desktop, and a wall unit with two shelves above
The built-in desk from Lessons 1 to 6: 60" W × 23-1/4" D × 78" H, 19 parts from 3 sheets of 3/4" and 1 of 1/4" birch plywood, with 24 dados and rabbets.

The built-in desk

Two plywood base cabinets with a desktop across them and an open wall unit above, from four sheets of plywood.

  1. Lesson 1Break down the plywoodWhat you need, how positions work, and every part cut from the sheets.
  2. Lesson 2Stand up the first cabinetType where the sides and shelves go.
  3. Lesson 3Add the back and cut the jointsA 1/4" back, and the overlaps turned into dados and rabbets.
  4. Lesson 4Second cabinet and the desktopThe same cabinet 42" to the right, and the desktop on both.
  5. Lesson 5The wall unitOpen shelves above the desk.
  6. Lesson 6Cut list and shop planThe cut list, the joinery and the PDF to take to the shop.

Joinery, checks and assembly

  1. Lesson 7Loose joinery: a bench with DominosDominos, dowels, biscuits and pocket screws, with a 3-minute video.
  2. Lesson 8Check my plan and assembly stepsWhat's missing or risky, and the order it goes together.

Faster starts

  1. Lesson 9Start from the libraryA dining table with tapered legs, then Resize.
  2. Lesson 10Your shop's stock and labelsKeep offcuts, use them first, and label every part.
  3. Lesson 11From a parts listPaste a cut list and lay it out on sheets and boards.

Cabinets, curves and angles

One project a lesson, start to finish, each with its shop plan PDF.

  1. Lesson 12A base cabinet with doors and drawersOpenings, overlays, hinges, pulls and slides, a face frame and a frame-and-panel door.
  2. Lesson 13Shaped parts and full-size templatesArched aprons on a side table, bracket feet, and templates printed at 1:1.
  3. Lesson 14Angled workA mitered picture frame with splines, then a coffee table on splayed, tapered legs.

Wood and your shop

  1. Lesson 15Solid woodA red oak coffee table: grain, wood movement, finish and cost, then its top from rough lumber.
  2. Lesson 16Your shopMy tools, machine limits, Optimize sheets, setup sheets and tool findings.

Built-ins and outdoor

  1. Lesson 17A built-in from a photoA desk wall from a photo of the wall, with pocket doors.
  2. Lesson 18OutdoorA deck with stairs and a railing, then a shed, with the buy list, fasteners and notes for your building department.

Share, send and the apps

  1. Lesson 19Share and sendThe shop plan PDF, a CSV, CNC files, labels, a share link and Send to Bit & Grain.
  2. Lesson 20iPad and MacThe menu bar, project files, See it in your room, touch and quick actions.

Lessons 1 to 7 are also a 9-minute video (MP4, 14 MB, captions on screen, no sound), and Lesson 7 has its own video. The videos cover Lessons 1 to 7 only, and were recorded on an earlier version of the app, so some screens look different from the pictures in the lessons.

Short answer: adding a back to a cabinet

  1. Add a sheet of 1/4" plywood from the lumber rack (Sheets tab, Thickness 1/4").
  2. With the sheet selected, choose Cut to size. Make it the inside width plus 3/8" per side, and the full height. For an 18" wide cabinet that's 17-1/4" × 29-1/4".
  3. In Position, click On edge. The back stands up with its face toward the room.
  4. Type Left edge 3/8" and Back edge 0. It now sits 3/8" into each side, against the wall.
  5. Select each side and click Cut joints where parts overlap. The overlap becomes a 1/4" × 3/8" rabbet for the back.

Lesson 3 shows each step with screenshots.