The same planner runs in the iPad and Mac apps. Here is what the apps add: a menu bar with keys, project files you save and open, your project in your room at real size, touch, and a right-click menu for the mouse.
Time15 min
BuildsAny project: the base cabinet from Lesson 12
You need: Dry Fit on an iPad or a Mac, and any project, such as the library's base cabinet from Lesson 12. A free account to save a project file or see it in your room.
What you'll build
Nothing new: the base cabinet from Lesson 12, saved as a project file and seen in your room. This picture is from a desktop browser.
Overall size24" W × 24" D × 34-1/2" H
Parts key
Name
Size
What it is
From
Base cabinet
17 parts
The project, saved as base-cabinet.dryfit
Library
Sheet A
96" × 48"
A fresh sheet of 3/4" Birch Plywood for the quick actions
Add sheet to shop
Part 1
96" × 11-1/4"
The strip ripped with the mouse
Sheet A
Offcut A1
96" × 36-5/8"
The rest of Sheet A after the rip
Sheet A
After this lesson you can use the menu bar and keys, save and open project files, see a project in your room, and cut with the mouse.
The pictures are from the iPad app on the iPad simulator, in portrait, except What you'll build and Quick actions on the Mac. The simulator has no camera, so the AR step shows the screen it gives instead.
The menu bar
On the Mac, Dry Fit's menu bar has File, Edit and View beside the app's own menu, which has Settings… (⌘,). On an iPad with a keyboard, hold ⌘ to see the same items and their keys; iPadOS 26 shows them in its menu bar.
File:New project⌘N, Open project file…⌘O, Start from a photo…, Start from a parts list…, New from library…, Scan a label…; Save project file…⌘S; Export shop plan…⌘E, Export cut list⇧⌘E, Export CNC files…, Export USDZ… (on the iPad, See it in your room); Share….
Edit:Undo⌘Z and Redo⇧⌘Z, the system's Cut, Copy, Paste and Select All, then Make another⌘D, Turn 90°, Tip, Position keys (P) and Throw away. Those last four keep their keys on the page: R, ⇧R, P and Delete. Last come the quick actions, each with its key in its name: Quick actions (S), Rip (W), Crosscut (C), Cut in half (H) and Joinery (J).
View:Hide lumber rack⌃⌘S and Hide inspector⌥⌘I (they say Show while the pane is hidden); Check my plan⌘K and My shop's stock; the views 3D, Front, Top, Side, Bottom, Left and Back on ⌘1 to ⌘7; Zoom to fit⌘0, Zoom in⌘=, Zoom out⌘-; ticks for Leftovers, Snap, Dimensions, Kerf tags, Grain and Assembly steps; Inches or Millimetres; and Appearance: System, Light or Dark.
The menu follows the planner. While a dialog is open, or a part is in your hand, its planner items are off. Undo and Redo are off with nothing to undo or redo, the part items with no part selected, and the exports, Share and See it in your room with nothing on the bench. The ones that need an account stay on and ask you to sign in when you choose them.
On the iPad, the project menu (tap the project's name) has the same file items: New project, Start from a photo, Start from a parts list, Optimize sheets…, Open project file…, Save project file, Share…, Scan a label and Project library…, with their keys beside them.
The top bar shows icons for the tabs on a narrow screen. The view toolbar has See it in your room on the iPad.
Project files
Click Save project file (⌘S). This needs a free account. The project is saved as one file named for it, base-cabinet.dryfit. On the iPad the share sheet opens: tap Save to Files and pick a folder, or send it on. On the Mac a save panel asks where.
The share sheet calls it a Dry Fit project. On the iPad and the Mac, the apps open .dryfit files.
To open one, tap it in Files on the iPad, or double-click it in Finder on the Mac. Dry Fit opens it where it is and says Opened Base cabinet. If what's on the bench isn't saved, Dry Fit asks before it puts the file in its place.
Here on a fresh install, so the bench was empty.
Or choose Open project file… (⌘O) and pick it. The picker offers Dry Fit projects and older .dryfit.json files, which still open; other files are greyed. On the Mac you can also drag a .dryfit or .json file onto the window.
Opening a file needs no account.
See it in your room
On the iPad, tap See it in your room on the view toolbar (or choose it from the File menu). It needs a free account and something on the bench. Dry Fit builds a 3D model of the project, then opens it in AR Quick Look over the camera, at its real size.
Point the iPad at the floor. A project on the floor stands on it, and you can walk round it; it stays at real size, so pinching doesn't scale it. A project that sits more than about 6" up, such as a wall cabinet, goes on a wall with its back against it. Doors are closed and drawers in. Tap Done to come back to the bench.
The simulator has no camera, so Quick Look shows only the model's name and size. On an iPad the cabinet appears in the room in its place.
The Mac has no AR. There the item is Export USDZ…: it saves the model as a .usdz file to open on an iPhone or iPad. In a desktop browser the button says Export USDZ and downloads the same file. In Safari on an iPhone or iPad it says See it in your room and opens AR, as the app does.
Touch
On the iPad, drag a part to move it. Drag one finger on empty space to turn the view, pinch to zoom, and drag with two fingers to pan.
To pick more than one part, tap one, then tap Select more in the Inspector. Each tap now adds a part, or takes it out. Here the door and a side are picked, so the Inspector shows 2 parts selected with what you can do to both: resize them, fit them to a total size, line them up. Tap Done selecting when you have them.
With a mouse or trackpad, Shift-click or ⌘-click does the same.
Quick actions on the Mac
With a mouse or trackpad, the tools come to the pointer. This works in the Mac app and in any desktop browser. The pictures in this section are from a desktop browser, which runs the same planner.
Try them on a fresh sheet. Your cabinet is saved as a file, so choose New project in the project menu and click Add sheet to shop: Sheet A, a 4' × 8' sheet of 3/4" Birch Plywood, is on the bench.
Right-click Sheet A in the 3D view (or click with two fingers, or Control-click). The piece is selected and a menu opens at the pointer, with the piece's name, Sheet A, at the top. Point at Cut, Joinery or Position to open its list. The group you used last opens on its own, so doing the same cut again is a right-click and a click.
Cut has the same saws as the Inspector, with their keys on the right. A part has no Square, and solid wood adds Plane to thickness.
Joinery has the joints the Inspector offers for your tools, and choosing one opens its form as the Inspector's button does. Position has Lay flat, Stand on edge, Stand on end, Turn, Move (the Left edge box, ready to type), Make another and Throw away. Right-click the floor for Fit view, Select all, Undo and Redo. The arrow keys move through the menu, Return chooses and Esc closes it.
Point at Cut and choose Rip. A red cut line follows the pointer across the sheet, with a tape tag showing the strip width it would cut, measured from the same edge as the Rip form. It moves in 1/16" steps and settles on eighth-inch marks near it. Hold ⇧ to place it freely.
The Rip form in the Inspector follows the line too. Name the strips shows the name the strip gets, Part 1.
Click where the cut goes. A box opens right there with the number selected, so you can type the exact size at once. Press Return to cut, Tab for How many, or Esc to take the line away without cutting. Here, type 11 1/4 and press Return: Ripped 1 piece at 11-1/4".
Before you press Return: the box ready to type.
The strip is Part 1, 96" × 11-1/4", and it stays selected. The rest of the sheet is Offcut A1, 96" × 36-5/8". Both are in the In the shop list by those names.
Crosscut works the same way, along the length: with Part 1 selected, press C. Cut to size, Cut in half and Square open their forms in the Inspector with the first box ready to type.
The single keys work whenever you're not typing in a box. They're also in the Inspector's Shortcuts list (with nothing selected) and in the tooltips of its saw buttons.
S: the quick menu, at the pointer, for the piece under it, or the selected piece.
W: rip the selected piece, placing the line with the mouse.
C: crosscut it the same way.
H: cut it in half.
J: the quick menu, open at Joinery.
What you end up with
The base cabinet in the iPad app, saved as a .dryfit file you can open on the iPad, the Mac or the web, and seen at its real size in your room.
The same project file opens in the browser at Dry Fit with Open project file….
That's the workshop. All lessons has every project again.