The project library is Dry Fit's set of ready-made projects: tables, cabinets, a kitchen island, a workbench and boxes, made to the sizes you pick with real cuts and joints. Make a dining table with tapered legs from the project library, then make it 2' longer.
Time15 min
BuildsA 96" dining table
You need: Dry Fit open in your browser, or the iPad or Mac app. No account.
What you'll build
The dining table after it's made 2' longer, with the names the library gives its parts.
Overall size96" W × 36" D × 30" H
Parts key
Name
Size
What it is
From
Leg
29-1/4" × 1-3/4" × 1-3/4" ×4
Tapered legs, cut from 8/4 red oak
Board A
Front apron, Back apron
90-1/4" × 4"
The long aprons, 24" longer after Resize
Boards B, D
Left apron, Right apron
30-1/4" × 4"
The short aprons at the ends
Board C
Top board 1 to Top board 6
96" × 6"
The six boards glued up into the top, 24" longer after Resize
Boards E to J
After this lesson you can start from a library project and resize it, and read tapers and saw setups in the cut list.
The project library has tables, cabinets, a kitchen island, a workbench and boxes, each made to the sizes you pick, with real cuts and joints you can change after. Here you make a dining table with tapered legs, then make it 2' longer so it seats 8.
Open the project menu (click the project's name at the top) and click Project library…. On an empty bench, Project library is there too. Under Tables, click Dining table.
Leave Seats at 6 (72" × 36" × 30"). Under Legs, click Tapered: Foot size and Taper starts below the top appear. The line at the bottom adds it up. Click Make it.
Picking 8 under Seats would make it 96" long from the start. Here it's made at 6 and lengthened, to show Resize.
Resize moves and stretches the parts you select, so lengthen the base and then the top. Click a Leg, then Shift-click the other three Leg parts and the four aprons: Front apron, Back apron, Left apron and Right apron. The Inspector says 8 parts selected and shows Overall for them: 68" W × 32" D × 29-1/4" H. Type 92 in Width and press Return. A line says what will happen: Back apron and Front apron are re-cut 24" longer, and Leg ×2 and Right apron move 24" to the right. Click Resize. The eight parts stay selected.
Before you click Resize: nothing changes until you do, and it's one step to undo.
Click any board of the top. The six, Top board 1 to Top board 6, are glued up, so they select together and the Inspector says Top (6 parts), 72" wide. Type 96 in Width, press Return, and click Resize. All six get 24" longer. Overall at the foot of the window now reads 96" W × 36" D × 30" H, with the 2" overhang at each end as before.
Open Cut list. Hide the lumber rack with the button at the top left to give the table room. Leg (4 of them) is listed at its blank size, 29-1/4" × 1-3/4" × 1-3/4", and the Angles column says what to cut after that: Taper 2 inside faces from 1-3/4" to 1", starting 5" down.
Top board 1 to 6 are 96" now, and Back apron and Front apron 90-1/4".
Scroll to Cut sequence and click By setup. The same cuts are grouped by machine setting, so you set the fence once and make every cut on its list. One setup is the table saw's taper jig, with where to mark the leg and how far off the blade should take at the foot.
Each cut has a box to tick. Setup sheets print in the shop plan PDF too.
What you get: a 96" red oak dining table in 14 parts, with a cut list that gives each leg's taper and the saw setups to cut it.