Lesson 6

Cut list and shop plan

Read the cut list and joinery for the desk, and export the shop plan PDF.

You need: The desk from Lesson 5. A free account for the PDF.

What you'll build

The Cut list page for the built-in desk, with the Parts table listing Desktop, Side, Wall shelf, Shelf, Wall side, Wall back and Back
This lesson makes a plan, not a new part: the Cut list for the finished desk, and from it the shop plan PDF.

Overall size 60" W × 23-1/4" D × 78" H

Parts key

NameSizeWhat it isFrom
Desktop60" × 23-1/4" ×1The desk topSheet A
Side29-1/4" × 23-1/4" ×4Base cabinet sidesSheet A
Shelf17" × 23" ×6Base cabinet shelvesSheet B
Wall side30" × 11" ×2Wall unit sidesSheet B
Wall shelf59" × 10-3/4" ×3Wall unit shelvesSheet C
Wall back59-1/4" × 30" ×1Wall unit back, 1/4"Sheet D
Back17-1/4" × 29-1/4" ×2Base cabinet backs, 1/4"Sheet D

After this lesson you can read the cut list and joinery, and export a shop plan PDF.

Open Cut list at the top. Its Parts table lists the 19 parts as 7 rows, one per name, with the sheet each comes from. It groups identical parts, lists which parts join and how under Assembly, gives every joint's size and position under Joinery, and shows what to buy and what's left over.

Joinery table listing rabbets and dados for the cabinet sides and wall sides, marked as mirror pairs
Joinery, further down the page. The four Sides are listed together as Side ×4, and the two Wall sides as Wall side ×2: each pair is a mirror pair, the same cuts on opposite faces.

Click Export plan for a PDF to take to the shop: a 3D view, front, side and top drawings with dimensions, the cut list, joinery, cutting diagrams for all four sheets, the cut sequence with checkboxes, setup sheets, the leftovers worth keeping and the assembly steps. Exporting needs a free account. CNC files, beside Shop plan PDF, saves the parts as DXF or SVG files for a CNC router instead.

Export shop plan dialog with paper size and section checkboxes
Pick US Letter or A4 and the sections you want.

The finished project is built-in-desk.dryfit.json. Open it with Open project file… in the project menu (click the project's name at the top) to compare with your own.