Start from a parts list is how Dry Fit turns a cut list you paste into parts laid out on sheets and boards. Paste a cut list from a magazine plan or a spreadsheet and let Dry Fit lay it out on sheets and boards.
Time10 min
BuildsA bookcase laid out on stock
You need: Dry Fit open in your browser, or the iPad or Mac app. No account.
What you'll build
The bookcase's parts as Lay out leaves them: cut and laid flat by material, not yet assembled. Each carries the name from its line of the list.
Overall size73-15/16" W × 100-3/8" D × 3/4" H, laid flat
Parts key
Name
Size
What it is
From
Side
36" × 11-1/4" ×2
The bookcase's sides
Sheet A
Top, Bottom
31-1/4" × 11-1/4"
The top and bottom of the case
Sheet A
Shelf
31-1/4" × 11" ×3
The shelves (the misspelled row)
Sheet A
Back
35-1/4" × 31-3/4"
The back, 1/4" plywood
Sheet B
Edging
31-1/4" × 3/4" ×5
Poplar strips for the front edges
Board C
After this lesson you can turn a pasted parts list into cutting diagrams, a cut list and a shopping list.
Have a cut list from a magazine plan or a spreadsheet? Paste it, and Dry Fit lays the parts out on sheets and boards for you.
Open the project menu and click Start from a parts list. On an empty bench, it's there too.
Click in the first cell and paste. Rows from a spreadsheet work, and so do lines like these, with a misspelled material on the shelves:
Bookcase
Side 2 36 x 11-1/4 x 3/4 birch ply
Top 1 31-1/4 x 11-1/4 x 3/4 birch ply
Bottom 1 31-1/4 x 11-1/4 x 3/4 birch ply
Shelf 3 31-1/4 x 11 x 3/4 birch plywod
Back 1 35-1/4 x 31-3/4 x 1/4 birch ply
Edging 5 31-1/4 x 3/4 x 3/4 poplar
The first line becomes the project name, and each line a row: part, quantity, length, width, thickness and material. A cell Dry Fit can't read turns red and Lay out stays off (1 row needs fixing.). On the Shelf row, Material? birch plywod offers the nearest materials: click Birch Plywood. The red goes, Lay out turns on, and the line under the table counts the shelves too: 13 parts, 2 materials. If you kept pieces in Lesson 10, Use My shop's stock first is ticked, so a kept piece is used wherever a part fits on one. None of the desk's offcuts left in My shop's stock after Lesson 10 fits these parts, so the result below is the same either way.
Before you click Birch Plywood: the shelf row is red and the line under the table counts 10 parts, without the three shelves. It says how much stock the list comes to before anything is laid out.
Click Lay out. Dry Fit makes a new project named Bookcase, with real saw cuts, kerf and all, and lays the parts flat on the floor by material. If the project you had open isn't saved, it asks first. In the shop says 13 parts, each named from its line: Side, Top, Bottom, Shelf, Back and Edging. Open Diagrams to see where each part comes from: here Sheet A, 3/4" birch plywood, for the sides, top, bottom and shelves; Sheet B, 1/4", for the Back; and Board C, a 4/4 poplar board 4-1/2" × 3', for the Edging.
The cut list says Not assembled: made from a parts list. To join them, stand the parts up and cut the joints as in Lessons 2 and 3.
In the project menu, click Optimize sheets…. Lay out already packs the parts the way Optimize does, so here it says 3 sheets → 3 sheets. Already as few as it can be.
Optimize compares the layout now with the best it can find.
What you get: a magazine plan's parts list turned into a cut list, cutting diagrams and a shopping list.