Lesson 1

Break down the plywood

Cut every part of a built-in desk and wall unit from four sheets of plywood, with the kerf taken out.

You need: Dry Fit open in your browser, or the iPad or Mac app. No account.

What you'll build

Four plywood sheets in the shop with all 19 desk and wall unit parts cut from them, each kind of part tagged with its name
The end of this lesson: all 19 parts cut from four sheets, each with the name you give it. Lessons 2 to 5 put them together.

Overall size Four 4' × 8' sheets: three 3/4" birch ply, one 1/4"

Parts key

NameSizeWhat it isFrom
Side29-1/4" × 23-1/4" ×4The sides of the two desk cabinets, two eachSheet A
Desktop60" × 23-1/4"The top that spans both cabinetsSheet A
Shelf17" × 23" ×6Bottoms, tops and middle shelves of the two cabinetsSheet B
Wall side30" × 11" ×2The ends of the wall unit above the deskSheet B
Wall shelf59" × 10-3/4" ×3The wall unit's long shelvesSheet C
Wall back59-1/4" × 30"The 1/4" back of the wall unitSheet D
Back17-1/4" × 29-1/4" ×2The 1/4" backs of the two cabinetsSheet D

On the way you also cut and name strips: Strip 1 to Strip 5 and three Wall shelf strips. Each one is cut up into the parts above, so none is left at the end. Pieces named Offcut are leftovers the app names for you.

After this lesson you can rip, crosscut and cut to size, and name every piece as you cut it.

Before you start

What you need for Lessons 1 to 11, and how positions work.

Every part has three position boxes in the right-hand panel. They give the distance to the part's left, bottom and back faces. You can drag a part and read the numbers as it moves, or type exact numbers when you know them.

Left edgeFrom the left end of the wall. 0 is the left wall.
Off floorHeight of the part's bottom face. 0 is the floor.
Back edgeDistance out from the wall. Back edge 0 is tight to the wall.

New sheets land out in front of the build area, so the space along the wall stays clear. Name the project first: click Untitled project at the top, click the Name box in the menu that opens, and type Built-in desk.

Cut the parts

Like in the shop, cut every part from the sheets first, then assemble.

  1. In the Lumber rack, leave Birch Plywood, 3/4", 4' × 8' selected and click Add sheet to shop. This is Sheet A.
A 4 by 8 sheet of 3/4 inch birch plywood selected in the shop, with the saw tools in the right panel
The sheet comes in selected. The saw tools are in the right panel.

Squaring. The panel suggests squaring a new sheet, since sheets are rarely square from the yard. This lesson keeps the full 48" × 96" so the numbers stay round. Lesson 7 shows how to square one.

  1. Click Rip. Type 23 1/4 for the strip width, leave How many at 1, and type Strip 1 in Name the strips. Strip 1 is the strip that becomes three cabinet sides. Don't click the button yet.
Rip form filled in with 23 1/4 and the name Strip 1; the sheet shows a red kerf line and the strip highlighted in tan
Before you click: the red line shows where the saw cuts, and the form shows the 24-5/8" left over.
  1. Click Rip 1 strip. In the shop at the bottom left now lists Strip 1, 96" × 23-1/4", and Offcut A1, 96" × 24-5/8", the rest of the sheet. The app names leftovers for you.
  2. Click Offcut A1 in In the shop. Click Rip, type 23 1/4, leave How many at 1, name it Strip 2, and click Rip 1 strip. Strip 2 is the strip that becomes the fourth side and the desktop. Offcut A1 is now the 1-1/4" sliver left over.
  3. Click Strip 1 in In the shop. Click Crosscut, type 29 1/4, set How many to 3, name them Side, and click Crosscut 3 pieces.
Three pieces tagged Side cut from Strip 1, with Strip 2 still full length beside them, Offcut A2 at the end, and In the shop showing 4 parts
After Crosscut 3 pieces: three Sides from Strip 1, and Offcut A2, the 7-7/8" left over. Strip 2 is still 96" long. In the shop shows 4 parts: the three Sides and Strip 2.

The Check badge. The number on Check at the top goes up as you cut. It counts one note for each part that isn't joined to anything yet, so 4 parts show 4. It comes down as you put the cabinets together in Lessons 2 to 4.

With a mouse. On a Mac or with a mouse, right-click the sheet and choose Cut, then Rip or Crosscut, or select it and press W or C. Click where the cut goes, and type the size into the box that opens. Lesson 20 has more.

Finish Sheet A

  1. Click Strip 2 in In the shop. Click Crosscut, type 29 1/4, set How many to 1, name it Side, and click Crosscut 1 piece. That's the fourth Side. The rest of Strip 2 is now Offcut A3, 66-5/8" × 23-1/4".
  2. Click Offcut A3 in In the shop. Click Crosscut, type 60, set How many to 1, name it Desktop, and click Crosscut 1 piece. Sheet A is done: four Sides and the Desktop, 5 parts.

Sheets B, C and D

Cut the other three sheets the same way, one row at a time, top to bottom. Each row starts from what the row above leaves. In the Select column, click the piece with that name and size in In the shop (or in the 3D view). After a cut, the first new piece is already selected, so a row that says selected needs no click.

SelectToolSizeHow manyName itIt becomes
Sheet B: click Add sheet to shop again (still 3/4" birch ply, 4' × 8'). It comes in as Sheet B, selected.
Sheet B, selectedRip23"1Strip 3Five Shelves
Offcut B1, 96" × 24-7/8"Rip23"1Strip 4One Shelf and Strip 5
Strip 3, 96" × 23"Crosscut17"5ShelfCabinet bottoms, tops and shelves
Strip 4, 96" × 23"Crosscut17"1ShelfThe sixth Shelf
Offcut B3, 78-7/8" × 23"Rip11"1Strip 5Two Wall sides
Strip 5, selectedCrosscut30"2Wall sideThe wall unit's ends
Sheet B is done: six Shelves and two Wall sides. 13 parts so far.
Sheet C: click Add sheet to shop again. It comes in as Sheet C, selected.
Sheet C, selectedRip10-3/4"3Wall shelf stripOne Wall shelf each
A Wall shelf strip, 96" × 10-3/4"Crosscut59"1Wall shelfA long wall unit shelf
Another Wall shelf stripCrosscut59"1Wall shelfThe second
The last Wall shelf stripCrosscut59"1Wall shelfThe third
Sheet C is done: three Wall shelves. 16 parts so far.
Sheet D: in the Lumber rack, pick 1/4" under Thickness, then click Add sheet to shop. It comes in as Sheet D, selected.
Sheet D, selectedCut to size59-1/4" × 30"Wall backThe wall unit's back
Offcut D2, 36-5/8" × 30"Cut to size17-1/4" × 29-1/4"BackThe first cabinet's back
Offcut D3, 19-1/4" × 29-1/4"Cut to size17-1/4" × 29-1/4"BackThe second cabinet's back
Sheet D is done: the Wall back and two Backs. All 19 parts are cut.

Cut to size has no How many: it makes one piece. Type the first size under Length and the second under Width.

Cut to size form with 17 1/4 by 29 1/4 on a quarter inch plywood offcut
The first Back, before you click Cut to size: Offcut D2 is selected, next to the Wall back cut a step before. Cut to size rips first, then crosscuts, and keeps both leftovers.

Open Diagrams at the top to check the layout. Numbers match the cut list, and dashed boxes are leftovers you can still use.

Cutting diagram for Sheet A showing four sides and the desktop, 89 percent used
Sheet A: four sides and the desktop, 89% of the sheet used.