Lesson 5

The wall unit

Build the open wall unit above the desk the same way as the base cabinets.

You need: The desk from Lesson 4.

What you'll build

The finished built-in desk in 3D: two base cabinets, the Desktop and the open wall unit above, with name tags on the Wall side parts, a Wall shelf, the Desktop and a Shelf
The whole built-in: the desk from Lesson 4 and the open wall unit 18" above it.

Overall size 60" W × 23-1/4" D × 78" H

Parts key

NameSizeWhat it isFrom
Wall side30" × 11" ×2The wall unit's sidesSheet B
Wall shelf59" × 10-3/4" ×3Bottom, middle and top of the wall unitSheet C
Wall back59-1/4" × 30" ×1The wall unit's 1/4" backSheet D
Side, Shelf, Back, Desktop15 partsThe desk from Lesson 4Sheets A, B, D

After this lesson you can build a unit off the floor by typing its height, and check the overall size in a straight-on view.

The wall unit is built like the base cabinets: two sides, three shelves pushed 1/4" into the sides, and a 1/4" back. Its bottom is 48" off the floor, 18" above the desk. Its parts are the last ones still lying out front: in In the shop, the two Wall side rows under Sheet B, the three Wall shelf rows under Sheet C and the Wall back row under Sheet D. Click each row, click its orientation, and type its numbers.

Part (In the shop row)OrientationLeft edgeOff floorBack edge
First Wall sideOn end048"0
Second Wall sideOn end59-1/4"48"0
Wall shelf × 3Lay flat1/2"48", 62-5/8", 77-1/4"1/4"
Wall backOn edge3/8"48"0

Then click each Wall side row and click Cut joints where parts overlap. Each reads Cut 3 rabbets and a dado in Wall side.

Front view of the finished desk and wall unit with overall dimensions 60 inches wide and 78 inches high, and name tags on the Wall side parts, a Wall shelf and the Desktop
Click Front in the toolbar for a straight-on view. The tape tags give the overall size, and the status bar at the bottom reads Overall 60" W × 23-1/4" D × 78" H.

All 19 parts are placed. Check now counts 1: Desktop isn't joined to anything. Lesson 8 shows the fix.

About the 59" shelves. 3/4" plywood will sag over 59" once it's loaded with books. For a real build, add a vertical divider in the middle of the wall unit, or glue a 1-1/2" hardwood strip to the front edge of each shelf.

Measuring your plywood. Most "3/4" plywood is really 23/32". To build with real numbers, click Use 23/32" for 3/4" sheets under Tips in Check, or add your sheets from the Custom tab and type the thickness you measured. The dados will match.