Lesson 19

Share and send

Share and send are the ways a plan leaves Dry Fit. Take the base cabinet out of Dry Fit every way it goes: the shop plan PDF, the cut list as a spreadsheet, files for a CNC router, labels for the parts, a link anyone can open, and a draft estimate in Bit & Grain.

You need: The library's base cabinet from Lesson 12, with a drawer over a door. A free account for everything here but Scan a label. Send to Bit & Grain also needs a Bit & Grain business that you own or are an admin or manager of.

What you'll build

The library's base cabinet with name tags on the Base top, a Base side, the Base drawer front and the Base door
Nothing new is built here: this is the base cabinet from Lesson 12, which the lesson takes out of Dry Fit as a PDF, a CSV, CNC files, labels, a link and an estimate.

Overall size 24" W × 24" D × 34-1/2" H

Parts key

NameSizeWhat it isFrom
Base side30-1/2" × 23-1/4" ×2The cabinet's sidesSheet A
Base door24-1/4" × 23-7/8"The door under the drawerSheet A
Base top, Base bottom23" × 23"Top and bottom of the boxSheet B
Base shelf22-7/16" × 23"The shelf behind the doorSheet B
Base drawer front23-7/8" × 6"The drawer's show faceSheet B
Base toe-kick front rail, Base toe-kick back rail24" × 4"The toe-kick's front and backSheet B
Base toe-kick cross rail18-3/4" × 4" ×2The toe-kick's endsSheet B
Base back30-1/2" × 23-1/4"The 1/4" backSheet C
Base drawer box side ×2, Base drawer box back, Base drawer box front22" or 21" × 4-1/2"The 1/2" drawer box's sides, back and frontSheet D
Base drawer box bottom21" × 21-1/2"The drawer box's 1/4" bottomSheet E

After this lesson you can send a plan out of Dry Fit every way it goes: PDF, CSV, CNC files, labels, a link and a Bit & Grain estimate.

What needs an account

Share chosen while signed out: the Sign in to Bit and Grain box over the cabinet, saying Sign in to share a plan by a link, with Apple, Google and email sign-in and Create a free account
One account for Dry Fit and the Bit & Grain app. Signing up here doesn't start a trial.

The shop plan PDF

  1. Make the base cabinet as in Lesson 12: Project library…, Base cabinet, Pulls, Make it. Click Export plan at the top right. With Shop plan PDF picked, choose US Letter or A4 and tick the sections you want.
The Export shop plan dialog on Shop plan PDF: US Letter, the free plan's footer note, and the sections Front, side and top views, Cutting diagrams, Cut sequence, Setup sheets, Leftovers and Assembly steps, each with a tick box
On the free plan the pages carry a small "Made with Dry Fit" footer. Maker puts your own name or logo there.
  1. Click Download PDF. For this cabinet it's 24 pages, in this order:
    • Cover: the name, overall size, parts, sheets and boards, kerf and units, then Materials to buy (the sheets and every piece of hardware) and Cost at this project's prices.
    • Views: front, side and top with overall dimensions, and exploded views of the carcase and of the doors and hardware, every part by its cut list number.
    • Cut list, Joinery (each joint from the left end and top edge as drawn), Leftovers and Layout (where each shelf and divider goes, from one edge).
    • Cutting diagrams: each sheet with its parts, kerf in grey and joinery in red.
    • Cut sequence with a box to tick at each step, and Setup sheets, the same cuts grouped by machine setting.
    • Assembly steps: the order it goes together, with the parts and clamps for each step.
    Untick a section to leave it out.

The cut list as a CSV

  1. Open Cut list and click Download CSV (or press ⇧⌘E in the apps). It saves base-cabinet-cut-list.csv, one row a line of the parts table with the columns #, Part, Qty, Length (in), Width (in), Thickness (in), Material, From, ready for a spreadsheet or a panel saw's software.

CNC files

  1. Click Export plan and pick CNC files. Choose DXF, SVG or Both, then what to draw: Sheets as laid out (each sheet with its parts where the cutting diagram has them), Each part on its own (one file a part, shared by identical ones), or both. Type your Bit diameter. Tick Dogbone the inside corners to cut past each inside corner so a square part seats; left off, those corners stay round at the bit's radius and are marked.
The export dialog on CNC files: Both formats, Sheets as laid out and Each part on its own ticked, a 1/4 inch bit, Dogbone off, 42 drawings and a README in base-cabinet-cnc.zip, and notes about sheets where parts sit closer than the bit and 4 pocket-hole joints left out
The notes say what to check first: here the parts sit 1/8" apart on three sheets, closer than the 1/4" bit, so set the project's kerf to the bit's diameter and run Optimize sheets again, or cut each shared line once.
  1. Click Download zip. base-cabinet-cnc.zip has a sheets folder (sheet-a to sheet-e), a parts folder (01-base-drawer-box-side-1 and on) and a README. The DXF files are R12 in inches and say so in their header; the SVG files are in millimetres at true size. Each cut is on a layer named for what it is and how deep: OUTLINE (profile outside the line, all the way through), GROOVE_0.25IN_DEEP, RABBET_0.375IN_DEEP, the hinge cups, shelf pin and handle holes, LABELS and SHEET_EDGE. The README lists the joints a router can't cut from the face, here the toe-kick's pocket holes.
Sheet A's SVG file: the cabinet's door and two sides laid out as on the cutting diagram, the sides with their rabbets and rows of shelf pin holes, the door with its two hinge cups, each part labelled
Sheet A's SVG, its lines thickened here so they show at this size. A part marked "turned over" is drawn with its cuts facing up.

Part labels and Scan a label

  1. Click Export plan again. It opens on CNC files, the side you used last: click Shop plan PDF and scroll to Part labels: 17 labels, one a part, on one sheet. Pick the Label sheet (Avery 5160 / 8160, 5163 / 8163 or L7160), set Start at label for a part-used sheet, and click Download labels. Print at 100% (Actual size).
The export dialog scrolled to Part labels: 17 labels on 1 sheet of Avery 5160 or 8160, Download labels, the three label sheets, Start at label, the nudges and Draw the label outlines
If they print off, nudge them up to 5 mm. Draw the label outlines prints a test on plain paper.
The cabinet's label sheet: 17 labels in three columns, each with the part's number, name, size, material and grain, and a QR code
Each label has the part's number, size, material, grain and banded edges, and a QR code that opens it in Dry Fit.
  1. Stick each label on its part as you cut it. To find a part later, click Scan a label in the cut list or the project menu (no account needed) and hold the QR code to the camera, or pick a photo of it. Dry Fit selects the part, by its cut list name, and says which: here the first label gives Found 1 Base drawer box side, 2 of them. Lesson 10 has more on labels.
The cabinet after scanning a label, turned to the drawer: name tags on the two Base drawer box sides inside it, both selected, with their 22 by 4-1/2 inch sizes drawn on
Two parts share the number, so both are selected.

A read-only link

  1. In the project menu, click Share…. Anyone with the link sees the 3D view, the cut list and the diagrams. They can't change it and don't need an account, and they can make a copy of their own.
  2. Tick Include prices to show the Cost table with your prices; left off, the link shows no cost. Pick how long it lasts under Expires: Never, 7 days, 30 days or 90 days. Click Make a link, and the link is copied for you to paste.
The Share Base cabinet box: what anyone with the link can see, Include prices ticked, Expires 30 days, Make a link, and Links to this plan, none yet
A link shows the plan as it was when you made it. Changes you make after don't show until you update it.
  1. Each link is listed under Links to this plan with when it was made, when it expires, whether it has prices and how often it's been opened. Copy link copies it again. Update the shared copy puts the plan as it is now behind the same link. Revoke asks first, then stops the link working for good. Settings lists every link you've made under Shared links, up to 100 live at once.

Send to Bit & Grain

  1. If you own a Bit & Grain business, or are its admin or manager, a Send to Bit & Grain button sits by the Cost heading in the cut list and at the foot of the export dialog. Click it.
  2. Check the Markup on materials, % (it starts at the business's own) and the Rate an hour, $ (its hourly rate), and type 6 in Labor hours (optional). Search for a customer, or leave it blank and pick one in Bit & Grain. The line under it works out what goes: here, with 6 hours at $65, 10 lines: materials $496.60, labor $390.00, $886.60 before tax. Bit & Grain adds the business's tax rate.
  3. Click Send to Bit & Grain. The Cost table arrives as a draft estimate, one line a row, with a link back to the project, for you to check and send to the customer from Bit & Grain. Sending again updates that draft until it's sent. Dry Fit saves the project first if it isn't saved, and with more than one business you pick which.
The Send to Bit and Grain box for a sample business: markup on materials 30 percent, 6 labor hours at 65 dollars an hour, an empty customer search, and 10 lines, materials 496.60 dollars, labor 390 dollars, 886.60 dollars before tax
Shown for a sample business, Sample Woodworks, with a 30% markup and $65 an hour. Nothing was sent.

What you end up with

The base cabinet as a shop plan PDF, a CSV of its parts, DXF and SVG files for a router, a sheet of labels that lead back to each part, a link to send anyone, and, for a Bit & Grain business, a draft estimate ready to send.

The base cabinet from the library: a drawer over a door with bar pulls, on a toe-kick
The cabinet, 24" W × 24" D × 34-1/2" H: 17 parts from 5 sheets.