My shop's stock is the offcuts and boards you keep in Dry Fit, and the next project uses them before a new sheet. Keep the desk's offcuts, build a wall cabinet that uses them first, and label every part.
Time15 min
BuildsA wall cabinet and its labels
You need: The desk from Lesson 6. A free account and a label sheet for the labels.
What you'll build
The wall cabinet from the library, partly cut from the desk's offcuts. You also get a sheet of part labels.
Overall size30" W × 12" D × 30" H
Parts key
Name
Size
What it is
From
Upper door
29-7/8" × 14-7/8" ×2
The two doors, part 1 on the labels
Sheet A
Upper side
30" × 11-1/4" ×2
The cabinet's sides
Sheets A, B
Upper top, Upper bottom
29" × 11"
The top and bottom of the box
Sheets C, B
Upper shelf 1, Upper shelf 2
28-7/16" × 11"
Adjustable shelves on pins
Sheet C
Upper back
30" × 29-1/4"
The back, 1/4" plywood
Sheet D
After this lesson you can keep offcuts for later projects, have Optimize use them first, and print and scan part labels.
Leftovers from one project can be the stock for the next. Here you keep the desk's offcuts, make a wall cabinet that uses them first, and print a label for every part.
Open the desk (from Lesson 8, or built-in-desk.dryfit.json with Open project file…). In the lumber rack, under Leftovers you can still use, click Keep all. All ten offcuts (Offcut A2 and A3, B2 to B4, C1 to C4 and D1) now say In My shop's stock. Keep on a row keeps that piece alone.
Signed out, My shop's stock is kept in this browser. Signed in, it's in your account, on every device.
Open the project menu, click Project library…, then Wall cabinet, and Make it (30" × 12" × 30", two doors, two shelves). If the desk isn't saved, Dry Fit asks first. The rack now starts with My shop's stock: the desk's ten offcuts, each named as before with from Built-in desk after it (for example Offcut C1 from Built-in desk, 96" × 15-3/8"), and a Use button.
In the project menu, click Optimize sheets…. With Use My shop's stock first ticked, it packs the parts onto kept pieces before new sheets: 3 sheets → 2 sheets. Under After, two pieces From My shop's stock are used: Offcut C1 from Built-in desk and Offcut B3 from Built-in desk (78-7/8" × 11-7/8"). Click Use 2 sheets. Those two come into this project, reserved for it, as Sheet A and Sheet B, and the new sheets are Sheet C (3/4") and Sheet D (1/4" for the back). My shop's stock lists the other eight, and In this project lists the two with a Mark used button.
Before you click Use 2 sheets. After it, the cut list lists the two kept pieces under From My shop's stock, and they aren't on the list to buy.
Click Export plan (this needs a free account). Under the PDF's sections, Part labels makes a label for every part, each with its number, size, material, grain, banded edges and a QR code. Pick the Label sheet, click Download labels, and print at 100% (Actual size). Start at label uses up a part-used sheet, and the nudges move the print if it lands off.
For a test, tick Draw the label outlines, print on plain paper and hold it over a label sheet against a window.
Stick each label on its part as you cut it. To find a part later, open Cut list and click Scan a label (it's in the project menu too). Hold the QR code in the camera's frame, or pick a photo of the label (Pick a photo, or Use a photo instead while the camera is on). Dry Fit selects that part and brings it into view. Here the label was part 1, Upper door. There are two of them, so both Upper door parts are selected and a note says Found 1 Upper door, 2 of them.
The label's own "1 of 2" says which of the two you're holding.
What you get: the desk's offcuts kept for any project, a wall cabinet that needs one sheet fewer, and labels that take you from a part on the bench to the part in Dry Fit.