Lesson 4

Second cabinet and the desktop

Place the second base cabinet and lay the desktop across both.

You need: The cabinet from Lesson 3.

What you'll build

Both base cabinets with the Desktop across them, with name tags on the Desktop, two Shelf parts and two Side parts
The desk: two base cabinets 24" apart with the 60" Desktop across them. The Overall in the status bar is bigger: it also counts the parts still lying out front.

Overall size 60" W × 23-1/4" D × 30" H

Parts key

NameSizeWhat it isFrom
Side29-1/4" × 23-1/4" ×4Two per cabinet. The third and fourth are new here.Sheet A
Shelf17" × 23" ×6Three per cabinet. The fourth to sixth are new here.Sheet B
Back17-1/4" × 29-1/4" ×2One 1/4" back per cabinet. The second is new here.Sheet D
Desktop60" × 23-1/4" ×1The desk top, resting on both cabinetsSheet A

After this lesson you can repeat a cabinet by typing positions, and lay a top across two cabinets.

The second cabinet uses the same numbers shifted 42" to the right, which leaves a 24" knee space. In In the shop, the parts not placed yet are the third and fourth Side rows, the fourth to sixth Shelf rows, the second Back row and the Desktop row. Click each row, click its orientation, and type its numbers.

Part (In the shop row)OrientationLeft edgeOff floorBack edge
Third SideOn end42"00
Fourth SideOn end59-1/4"00
Fourth, fifth, sixth ShelfLay flat42-1/2"0, 14-1/4", 28-1/2"1/4"
Second BackOn edge42-3/8"00
DesktopLay flat029-1/4"0

Then click the third Side row and click Cut joints where parts overlap, and do the same for the fourth. Each reads Cut 3 rabbets and a dado in Side.

Two base cabinets with the 60 inch Desktop across them, with name tags on the Desktop and the two bottom Shelf parts
The Desktop sits on top of both cabinets, so the desk is 30" high.

All four Sides, six Shelves, both Backs and the Desktop are placed. Check now counts 6: the Desktop, which nothing holds yet, and the two Wall sides and three Wall shelves still lying out front for Lesson 5.